Understanding Measurement Interpretation with the YR05636 Autoclave
The YR05636 Horizontal Cylindrical Pressure Steam Autoclave represents a significant advancement in laboratory sterilization technology. This article delves into the interpretation of results and reading measurements effectively, ensuring that operators can achieve optimal use of this sophisticated equipment.
Overview of the YR05636 Autoclave
The YR05636 is designed to provide efficient steam sterilization through a microprocessor-controlled mechanism. This device automatically manages water addition, heating, sterilization, drying, and exhaust processes. With its robust construction, it ensures safety and reliability during operation.
Technical Specifications
| Model | Brand | Category | Subcategory | Price (USD) | Price (EUR) | Gross Weight | Dimensions (mm) |
|---|---|---|---|---|---|---|---|
| YR05636 | Kalstein | Autoclave | Horizontal Autoclave | 3156.00 | 6126 | 350 kg | 1400×670×1650 |
Principles of Operation
Understanding how the YR05636 operates is essential for accurate measurement interpretation. The autoclave utilizes steam under pressure to sterilize equipment effectively. Sterilization occurs when steam reaches a temperature of 134°C, at a pressure of 0.22Mpa. This combination effectively kills microorganisms, ensuring that items are safe for use.
It is crucial to ensure that the temperature and pressure indicators are functioning correctly. The YR05636 features dual temperature and pressure gauges that provide real-time data, allowing operators to monitor performance accurately.
Interpreting Measurement Results
Operators must understand how to interpret the data displayed on the YR05636. Critical metrics include:
- Temperature: Measured in degrees Celsius, optimal sterilization occurs at 134°C.
- Pressure: Proper operation requires a pressure of 0.22Mpa; exceeding this can trigger safety mechanisms.
- Sterilization Time: The cycle can last from 0 to 60 minutes based on the load and type of materials.
Misreading these parameters can lead to inadequate sterilization or equipment damage. For instance, if the pressure exceeds 0.24Mpa, the safety valve activates, releasing steam to prevent over-pressurization.
Common Misinterpretations
Operators should be aware of common misinterpretations that can arise while using the YR05636:
- Reading Temperature: Ensure the gauge is calibrated, as faulty readings can occur from mechanical failure.
- Pressure vs. Time: Confusing high pressure with effective sterilization can lead to improper practices.
- Cycle Completion: Operators may assume cycles are complete based on time alone without confirming pressure and temperature metrics.
Examples of Measurement Interpretation
Consider the following examples to ensure correct interpretation:
- If the temperature gauge reads 130°C but pressure is optimal: Recheck the temperature setting; improper heating can indicate system malfunction.
- If both temperature and pressure are within ideal ranges, but there are issues with sterilization: It may be necessary to review the load or material compatibility.
Preparing for Use: Site Requirements
Proper installation is vital for the YR05636's operation. Here are essential site requirements:
- Temperature Control: Ensure ambient temperatures are between 15–30°C to maintain equipment performance.
- Ventilation: Adequate ventilation must be provided to dissipate heat and steam during and after operation.
- Electrical Supply: The device requires a dedicated electrical circuit with a voltage of 220V for optimal performance.
Frequently Asked Questions
What are the safety features of the YR05636 Autoclave?
The YR05636 includes multiple safety features such as a safety valve that opens at 0.24Mpa, automatic shut-off when water levels are low, and a security interlock that prevents the door from opening until pressure is at safe levels.
How can I calibrate the YR05636 Autoclave?
Calibration involves verifying the temperature and pressure gauges against known standards. This should be performed routinely to ensure accurate readings during sterilization cycles.
What should I do if the YR05636 fails to reach the desired temperature?
Check the heating element and ensure that the steam generator is functioning correctly. A malfunctioning component could cause heating issues.
How do I interpret the error codes on the YR05636?
Consult the user manual for a detailed list of error codes. Each code corresponds to specific issues such as low water levels, heating failures, or pressure anomalies.
What maintenance is required for the YR05636 Autoclave?
Regular maintenance includes checking seals, cleaning the chamber, and inspecting safety mechanisms to ensure the autoclave operates correctly and safely.
Can the YR05636 be used for different materials?
Yes, but it is critical to ensure that the materials are compatible with steam sterilization. Always refer to manufacturer guidelines for specific materials.
How do I request a quote for the YR05636 Autoclave?
You can request a quote by contacting our sales team directly, who will assist you in acquiring the YR05636 Autoclave that meets your needs.
If you are looking for a fusion of innovation and quality, you have come to the right place. At Kalstein, we offer you the luxury of exploring our exclusive catalog of laboratory equipment. We manufacture every device to the highest standards of excellence. Our intuitive and seamless online purchasing channels are designed for your convenience, securing the most competitive prices. Hesitate no longer — we bring science to life, it is time to become part of our community.