Site Requirements and Environmental Conditions for the YR06115 Surgical Lamp
The YR06115 LED Double-Head Surgical Lamp is designed to meet the demanding lighting requirements of modern surgical settings. Understanding the necessary environmental conditions for its installation is crucial for ensuring optimal performance and longevity of the device. This article delves into the specific site requirements and environmental conditions essential for the effective operation of the YR06115.
Technical Specifications of the YR06115 Surgical Lamp
| Specification | Details |
|---|---|
| Model | YR06115 |
| Illuminance | ≥160,000Lux / ≥120,000Lux |
| Color Temperature | 3800±500K, 4400±500K, 5000±500K |
| Color Reduction Index (Ra) | 95 |
| Illuminance Depth | ≥1300mm |
| Total Irradiance | 450W/m² / 390W/m² |
| Size of Light Field | 160~280mm |
| LED Bulb | 3.3mW/m² lx |
| Service Life of Illuminant | 50,000h |
| Power Supply Voltage | AC 110-240V, 50/60Hz |
| Brightness Adjustment | Automatic 8-stage continuous light adjustment |
| Lowest Height of Installation | 2900mm |
| Total Power Consumption | 140W |
| Total LED Bulb Quantity | 180 pcs |
Environmental Conditions for Installation
The installation of the YR06115 must adhere to specific environmental standards to ensure safe and effective operation. Key conditions include:
- Temperature Range: The operational temperature should remain between 10°C and 40°C to prevent overheating or malfunction.
- Humidity Levels: Ideal humidity should be maintained between 30% and 75% to avoid electrical faults.
- Power Supply: A stable AC 110-240V supply at a frequency of 50/60Hz is critical for consistent performance.
- Ventilation: Proper ventilation must be ensured to dissipate heat generated during use and maintain optimal operating conditions.
- Vibration and Noise: The lamp should be installed in an area free from excessive vibration and noise, which can disrupt its functionality.
Site Preparation Checklist for YR06115 Installation
Before installation, it is vital to prepare the site according to the following checklist:
| Preparation Task | Details |
|---|---|
| Check Power Supply | Ensure stable voltage and frequency according to specifications. |
| Verify Space Dimensions | Confirm that space allows for a minimum installation height of 2900mm. |
| Assess Ventilation | Ensure area is well-ventilated to maintain optimal temperature and air flow. |
| Level the Installation Surface | Ensure the installation surface is level to avoid positioning issues. |
| Inspect for Vibration Sources | Avoid installation near heavy machinery or vibration sources. |
Common Installation Mistakes
Understanding common pitfalls during installation can help avoid issues:
- Ignoring Power Specifications: Failing to match the required voltage can lead to equipment failure.
- Inadequate Space: Insufficient space can hinder the lamp's flexibility and usability.
- Poor Ventilation: Not allowing proper air flow can increase the risk of overheating.
- Incorrect Height Installation: Installing the lamp too low can impede its functionality.
Technical Glossary for YR06115
Understanding specific terms associated with the YR06115 can enhance user proficiency:
| Term | Definition |
|---|---|
| Illuminance | The amount of light per unit area, measured in Lux. |
| Color Temperature | A measure of the color of light, typically represented in Kelvin (K). |
| Color Reduction Index (Ra) | A metric indicating how accurately colors are rendered under the light source. |
| LED Bulb | Light Emitting Diode, the source of illumination in the lamp. |
| Power Consumption | The total power used by the lamp, measured in Watts (W). |
Frequently Asked Questions
What environmental conditions are necessary for the YR06115 surgical lamp?
The YR06115 requires an operational temperature between 10°C and 40°C and humidity levels between 30% and 75% for optimal performance.
How should I prepare the installation site for the YR06115?
Prepare the installation site by ensuring stable power supply, adequate space, sufficient ventilation, and a level surface. Check for potential sources of vibration that may affect the lamp's functionality.
What are common mistakes during the installation of the YR06115 lamp?
Common mistakes include overlooking power specifications, inadequate space for movement, poor ventilation, and incorrect installation height.
What is the significance of the Color Reduction Index (Ra) for the YR06115?
The Color Reduction Index (Ra) indicates how accurately colors will be rendered under the YR06115's illumination, critical for precision during surgical procedures.
What maintenance is required for the YR06115 surgical lamp?
Regular checks on the power supply, cleaning of the lamp surfaces, and ensuring the surrounding area remains free from obstructions will maintain optimal performance.
How can I adjust the brightness of the YR06115 surgical lamp?
The YR06115 features an automatic 8-stage continuous light adjustment system, allowing easy customization of brightness levels based on surgical needs.
Where can I request a quote for the YR06115 surgical lamp?
You can request a quote for the YR06115 by contacting our sales team directly through our website.
If you are looking for a fusion of innovation and quality, you have come to the right place. At Kalstein, we offer you the luxury of exploring our exclusive catalog of laboratory equipment. We manufacture every device to the highest standards of excellence. Our intuitive and seamless online purchasing channels are designed for your convenience, securing the most competitive prices. Hesitate no longer — we bring science to life, it is time to become part of our community.